Katool Two Post Asymmetrical Vehicle Lift 11000lbs Single Point Lock Release KT-AS110D

Katool Two Post Asymmetrical Vehicle Lift 11000lbs Single Point Lock Release KT-AS110D

The Katool KT-AS110D is a heavy-duty 2-post asymmetrical vehicle lift with an 11,000-lb lifting capacity, designed for cars, SUVs, and light trucks. It is CE-certified and tested to meet strict dynamic and static load requirements, ensuring strong structural reliability and safe operation under demanding conditions.

This lift uses dual hydraulic direct-drive cylinders to deliver smooth and stable lifting performance. The asymmetrical arm configuration provides better access to vehicle doors and cabin areas, enhancing convenience during maintenance and repair work. A single-point lock release simplifies operation, while adjustable extended support adapters allow the lift to accommodate different vehicle frame heights.

The KT-AS110D also includes essential safety features for workshop environments. These include an overhead safety shutoff bar to prevent over-lifting, rubber door-opening protection to avoid vehicle damage, and feet-protection guardrails with a built-in toolbox. Its low pad height makes it suitable even for low-chassis vehicles, while the high maximum lifting height provides ample clearance for underbody servicing.

The lift’s overall height and width offer a spacious working area, with generous drive-through clearance and wide column spacing. Constructed with a heavy, stable frame, the KT-AS110D is engineered for frequent use in professional auto shops, service centers, and well-equipped home garages.

Elevate Your Garage: Katool KT-AS110D Asymmetrical 2-Post Lift (11,000 lbs)

Safe, Efficient Lifting for Cars, SUVs, and Light Trucks

The Katool KT-AS110D offers a powerful and versatile lifting solution for your workshop. This CE-certified lift boasts a hefty 11,000 lbs capacity and exceeds industry standards for safety and reliability.

Features

• 11,000 lbs Capacity: Easily handle most cars, SUVs, and light trucks.
• CE Certified & Exceeds Standards: Meets 115% dynamic and 150% static load capacity for peace of mind.
• Single-Point Release: Convenient operation with a secure locking system.
• Asymmetric Arms & Direct Drive Cylinders: Provide efficient lifting and maneuverability for various vehicles.
• Door Entry Protection: Rubber pads safeguard your vehicle during entry/exit.
• Adjustable Arm Extensions: Accommodate a wider range of wheelbases.
• Overhead Safety Shutoff Bar: Stops operation instantly in case of contact.
• Safety Guardrails with Toolbox: Maximize workspace safety and organization.
• High-Quality Hydraulics: Choose between 110V or 220V operation for flexible power options.

The Katool KT-AS110D is ideal for professional mechanics and serious car enthusiasts who demand a reliable and versatile lifting solution.

Please note: Requires proper concrete installation (consult a professional).

12 Months All Parts Warranty

Specifications

• Lifting Capacity: 11,000 lbs (4,990 kg)
• Max Lifting Height: 70.75 in (1,800 mm)
• Min Lifting Height: 3.74 in (95 mm)
• Overall Height: 141.25 in (3,587 mm)
• Overall Width: 134.65 in (3,420 mm)
• Outside Column Height: 120.4 in (3,058 mm)
• Inside Column Height: 109.37 in (2,778 mm)
• Drive-Thru Clearance: 99.61 in (2,530 mm)
• Motor: 220V/60HZ/1PH (Optional: 110V/60HZ/1PH)
• Net Weight: 1,323 lbs (600 kg)

Understanding Two-Post Lift Weight Capacities

Two-post lifts are essential in automotive shops, but selecting the appropriate lift with the correct weight capacity is crucial for safety and equipment longevity.

Typical Weight Capacities

Two-post lifts generally have weight capacities ranging from 7,000 to 20,000 pounds, accommodating various vehicles from light-duty cars to heavy-duty trucks. It's important to note that each lift arm also has its own weight limit. For instance, a lift with a 10,000-pound total capacity may have each arm rated for 2,500 pounds. Therefore, if a vehicle's weight distribution exceeds this per-arm limit, the lift may not be suitable.

Calculating Required Lift Capacity

To determine the appropriate lift capacity:

1. Calculate Rear Axle Weight: Multiply the vehicle's total weight by the distance from the center of gravity to the front axle, then divide by the wheelbase.

2. Calculate Front Axle Weight: Subtract the rear axle weight from the total vehicle weight.

3. Determine Arm Capacity: Divide each axle's weight by two to find the load per arm.

For example, if a vehicle weighs 9,000 pounds with a 3,000-pound front axle and a 6,000-pound rear axle, each arm would need to support 3,000 pounds. In this case, a 10,000-pound lift with 2,500-pound arms would be insufficient.Opting for a 12,000-pound lift would be safer.

Importance of Choosing a Lift with Adequate Capacity

Selecting a lift with a capacity that exceeds the vehicle's weight requirements is advisable. This accounts for variables like vehicle modifications, additional equipment, or unexpected weight distributions. Many manufacturers recommend not exceeding 75% of a lift's rated capacity to maintain safety margins.

Safe Operating Practices

• Adhere to Weight Limits: Never exceed the lift's total or per-arm weight capacities.

• Proper Vehicle Positioning: Ensure the vehicle is centered and balanced on the lift to distribute weight evenly.

• Regular Maintenance: Follow the manufacturer's maintenance schedule and conduct routine inspections to identify potential issues.

By understanding and respecting the weight capacities and operational guidelines of two-post lifts, automotive shops can ensure safer working conditions and prolong the lifespan of their equipment.

SHIPPING POLICY: Please read carefully  

• Freight shipping ONLY within the lower 48 states. 
• Two post-lift products require a shipping fee ($590/piece) to commercial addresses only. Remote areas may be charged extra for shipping. Please confirm before delivery.  
• Shipping carriers may charge extra for residential Delivery. 
• THE BUYER IS RESPONSIBLE FOR UNLOADING FROM THE TRUCK.  
• Customers should consider Forklift and unloading dock services. 
• The buyer should be also responsible for any re-delivery charges.  
• Buyers should inspect delivered the products carefully before signing the Bill of Lading or Delivery Receipt at the time of delivery. Buyer satisfaction is assumed if no damages are noted on the delivery receipt.